NTE5010T1 thru NTE5021T1 Zener Diode, 500mW 1% Tolerance
Features: D Zener Voltage 5.1V to 12V D Constructed with an Oxide Passivated All Diffused Die D DO35 Type Axial Lead Package Absolute Maximum Ratings: Forward Voltage (IF = 100mA, TL = +30C, Lead Length = 3/8"), VF . . . . . . . . . . . . . . . . . . . . . . 1.5V DC Power Dissipation (TL +50C, Lead length = 3/8"), PD . . . . . . . . . . . . . . . . . . . . . . . . . . . 500mW Derate Above 50C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.33mW/C Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to +200C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to +200C Electrical Characteristics: (TL = +30C, Lead Length = 3/8" unless otherwise specified)
Nom Zener Voltage (Note 1) Vz @ Izt Volts 5.1 5.6 6.2 10.0 12.0 Zener Test Current (Izt) mA 5 5 5 5 5 Max DC Zener Current (Note 2) (Izm) mA 98 89 81 50 42 Max Zener Impedance (Note 3) Zzt @ Izt Ohms 50 25 10 15 22 Zzk @ 0.25mA (Izk) Ohms 2050 1800 1300 600 600 Typical Temperature Coefficient vz %/C +0.025 +0.035 +0.040 +0.065 +0.073 Max Leakage Current IR @ VR A Volts 2.0 2.0 1.0 0.1 0.1 2.0 3.0 4.0 8.0 9.1
NTE Type Number 5010T1 5011T1 5013T1 5019T1 5021T1
Note 1. Voltage measurement to be performed 20 seconds after application of the DC test current. Note 2. The maximum zener current (Izm) shown is for the nominal voltages. The following formula can be used to determine th worst case current for any tolerance device: P Izm = Vzm Where Vzm is the high end of the tolerance specified and P is the rated power of the device. Note 3. Zener impedance is derived from the 1kHz AC voltage which results when an AC current having an RMS value equal to 10% of DC zener current (IZT or IZK) is superimposed on IZT or IZK.
1.000 (25.4) Min .200 (5.08) Max
.022 (.509) Dia Max Color Band Denotes Cathode
.090 (2.28) Dia Max
|
